GRS Guided Surgery Kit for Conical Connection Hi-Tec Implants

The GRS Guided Surgery System provides clinicians with all the tools needed for guided surgery for conical connection implants . A variety of narrow, standard, and wide surgical drill sleeves ensures accurate placement of implants regardless of the diameter or length of the implant. Surgical drill stops are included for all of the drills, making over drilling impossible, ensuring patient safety. The GRS guided surgery kit is proudly made in the USA.

• Used to place any conical Hi-Tec Implants
• Compatible with Logic, Implex & Expert
• Includes everything you need for placement and restoration
• Implant Drivers are compatible with NobelActive® Conical Connection

Guide Printing Service

Surgical Drill Sleeves

Surgical drill sleeves are inserted into the 3d printed  or vacuum-formed guide at the time of surgery.

Narrow

• 2.0mm
• 2.5mm
• 2.8mm  
• 3.2mm
• 3.4mm
• 3.7mm

Regular

• 2.0mm
• 2.5mm
• 2.8mm
• 3.2mm
• 3.4mm
• 3.7mm
• 4.0mm
• 4.3mm
• 4.5mm

Wide

• 2.0mm
• 2.5mm
• 2.8mm
• 3.4mm
• 3.7mm
• 4.0mm
• 4.3mm
• 4.5mm
• 5.2mm

Surgical Guide Dimensions

The dimensions given below will help you accurately dimension your 3d printed guide.

Narrow

Diameter – 6.25mm

Height – 3.50mm

Regular

Diameter – 7.25

Height – 3.5mm

Wide

Diameter 8.9mm

Height – 3.5mm

Offset – 1.5mm for all sizes (Narrow, Regular, Wide)

Surgical Drill Stops

Surgical drill stops eliminate the possibility of over drilling. The drill stops are fastened to the drill using the provided drill stop driver. The surgical stoppers are housed underneath the upper cassette deck.

Drill Stop Sizes

• 2.0mm
• 2.5mm
• 2.8mm
• 3.2mm
• 3.4mm
• 3.7mm
• 4.0mm
• 4.3mm
• 4.5mm
• 5.2mm

Surgical Drill Stop Driver

The Surgical Drill Stop Driver is used to fasten/loosen the set screws on guided surgery drills.

GRS Depth Gauge

The GRS Depth Gauge is used to measure the length of the drill as well as to fasten the set screws on to the surgical drill stops. The depth gauge is autoclavable and can be used before or during surgery.

GRS Insertion/Removal Tools

The GRS insertion/removal tools come in two sizes: Narrow and Regular/Wide. These tools are used to remove/ insert the surgical drill sleeves from the cassette and guide. The insertion/removal tools are grabbed by hand and easily slide on to the guide. The unique quick release system reduces chair time and eliminates the risk of dropping the sleeves.  

Guided Surgery Drills 21mm & 27mm

The drills are available in both 21 and 27mm lengths. Titanium Nitride coating is applied to the guided surgery drills to help prevent premature wear.  A variety of diameters are available here for the 21mm and 27mm drills, but the drill set for this kit is equiped as follows:

• 2.0mm – 27mm
• 2.5mm – 27mm
• 2.8mm – 27mm
• 3.2mm – 27mm
• 3.4mm -21mm
• 3.65mm -21mm
• 4.0mm -21mm
• 4.3mm -21mm
• 4.5mm -21mm
• 5.2mm -21mm

Implant and Prosthetic Drivers & Adaptors

• NL-FT-S - Narrow Conical Insertion Tool, Short, for Handpiece
• NL-FT-L - Narrow Conical Insertion Tool, Long, for Handpiece
• SL-FT-S - Standard Conical Insertion Tool, Short, for Handpiece
• SL-FT-L - Standard Conical Insertion Tool, Long, for Handpiece
• SHT-S - Short 1.25mm Hex Prosthetic Driver, Hex/Square Wrench Connection
• SHT-L - Long 1.25mm Hex Prosthetic Driver, Hex/Square Wrench Connection
• IMDSN - Mount Driver for Handpiece
• ART - FT to Hex/Square Wrench Connection
• HR-TW - Hex Torque Wrench

GRS Surgical Rings (Narrow, Regular, Wide)

The GRS surgical rings are processed within the guide and interface directly with the surgical sleeves. These surgical rings are autoclavable and are not provided in this kit. You can find the surgical rings for 3D Printed and vacuum-formed guides here.

Components for the GRS Guided Surgery Kit can be found here